Minnie lives!

.
Minnie, our 600/750M, has been languishing for about 4 months now, ever since the day she intermittantly failed to proceed on my trip to register a business name. But I had a bit of spare time yesterday due to a bike not coming in so after I'd done as much office work as I could find I had a play and fixed her. Not what I was expecting as it turned out either, but intruging, ultimately easy and expenditure free. I went for a quick blast to remind myself of what a nice bike she is to ride.

I've had a fair variation of work in, everything from checking valve clearances on a K1200S (hadn't done that before) to reminding myself how a Multistrada comes apart. Fiddly. But it's all been good fun so far.

Last week I did manage to reset the high bar on my "wtf do I do that for" index by turning on the tap on a 20 litre drum of oil with a measuring jug under said tap then walking away, intending to come back within a short enough time frame to get the required amount of oil in the jug. As expected, the next time I thought about the oil running into the jug was about 6 litres after it had its 5 litre capacity in it. Luckily it was the cheap stuff, as it's also the thick stuff and had covered an area about 1m square. Had it been a hot day and the synthetic Ultra 6 litres would have just about covered the whole 118 square metres of factory floor. So I raced around to the cabinet makers behind me and grabbed a big bucket of sawdust to soak up the mess and left it at that for a couple of days as I had quite a bit of stuff to finish. Not surprisingly my motivation for cleaning up stuff like that can be rather low at times. Rather. I think it was the oil smell that got to me in the end.

Sensational purchase of the week award (for a couple of weeks ago) would be the Samsung 943BW computer monitor for the workshop computer. This monitor allows you to rotate the screen 90 degrees (in my case) so that it's tall and narrow, allowing me to see a full page of a pdf workshop manual. Very, very useful. Quite popular for doctors reading X-rays as well I'm told. Although the software that comes with it is as cryptic as it gets, and I really have no idea how I finally got it to do what I wanted it to. And my screen saver is now the back half of Raymond Roche's 1990 title winning 851.

I will get to putting up another photo of the factory soon. I have it much more organised now. I just keep forgetting to take the camera into work.
.

Ultimap - Fuel Injected Motorcycles

.
As some of you will know, Ultimap (formerly Fuel Injected Motorcycles) has closed down. This means there are no more new U59 ECU, Ultimap diagnostics or eproms apart from those dealers around the world have in stock. None. Nada. Ziparooni. I know of one person in the USA with a new U59 to sell if anyone wants one - I will forward details to him if you are serious.

A few people have rung or emailed me and told me that I'm apparently the new Ultimap person. This is not true. While Duane Mitchell and I have had a close working relationship over the last 14 or so years and became good friends through it, I haven't bought his business. Nor do I have a hot line to Duane should you have an issue with a U59 you need fixed. To get service on the U59 you need to follow the directions on the U59 web site.

Nor can I tell you how to contact Duane apart from his website, suffice to say he is now doing something else.

I can supply eproms to suit quite a few applications, and will be updating my eprom listing very soon. But I cannot and will not be selling Ultimap brand eproms, as I don't own them.

I hope that clarifies things a little.
.

Into the second month

.
The second month of operation! I'm getting myself much more sorted, although the factory is still lacking the finishing touches. My plan to be 100% set up and done before I started had to give way to "Oh my, where's all the money gone?" But you get that. Now I'm looking forward to the quiet times to get some more setting up done. Being on your own does have some limitations too - you look around and think "Hmmm, how am I going to do that?"

I have eftpos and credit card facilities now too, which is how I would guess is nearly all payments will be made. Certainly makes it a lot easier than carrying lots of cash around.

Some reading this may have found a business card on their bike at the Phillip Island WSBK meeting - myself and currently non monster owner Rohan (Spider) walked around the pit side of the track and put out as many cards as we could on anything applicable with VIC rego. We had to drive down due to neither of us having a bike to ride - mine not running, his stolen a few months ago. Unfortunately Rohan didn't get to see much of his first race meeting, being too busy dropping cards. Maybe next year we'll get down there for fun.

I had a rather odd experience today - deciding not to go out on a bike because it was raining (it doesn't rain too much in Melbourne these days!) . I didn't fancy piloting someone else's 175Hp on a wet road.

Apart from that it's been the usual work - so far I've had a fairly even mix of brands and jobs, with probably Aprilia SXV's being the most represented at this point. At some point I might even get around to fixing Minnie. I'm picking up a shop trailer tomorrow so will be able to get her in and park her in a corner. Actually, there's no corners for parking in I don't think. Perhaps I need to clean one out for her.
.

Contact details, etc

.

Well, I'm open for business this week. Although I'm still hunting through boxes for various tools, etc, as I need them for the first time. There's been a few "hmmm, I wonder where that is?" moments. And a few things found after they've been replaced, but you always get that.

The address is 2B King Street, Oakleigh. There's no signage as yet, so the photo to the right is what the front looks like. I might stick a big "2B" on the front door to make it more obvious. Or just look for next door's overflowing big steel wheelie bin. It's the second door in King Street off Connell. Phone number is (03) 9563 2004 and fax (03) 9563 3004.

.

3 Weeks since the last entry?

.
I really can't believe it's been 3 weeks since I last posted. Makes me wonder what I've been doing. Oh yeah, now I remember. Stressing out over all the stuff I have to do. Some idiot rather close to management decided a couple of weeks ago that he'd be ready for work by Monday 19th and booked in a job for then. Goose.

The new office and clean room are finished, and I put the first coat of paint on the floors this evening. Second coat goes on tomorrow and then come Monday we can move everything in. So I'm a little behind schedule, but the schedule keeps filling itself with stuff I hadn't even known to consider.

Sensational pucrhase of the week award for the last week would go to the Maktek cut off saw. The cheap badge of Makita, it'll do more work before the end of January than the following five years I expect. But I have always wanted a cut off saw. I've been cutting down some long span shelving into work benches and the like, and it's starting to look good layed out sort of where it will all be. Sort of.

I'll put up another photo when the mess has been sorted somewhat - It's still disorganisation central.
.

Fitting Out The Factory

.

My cousing Alister came down yesterday for a fun day of office framing - a little work for him on his holiday - and Ivan the electrician was in this morning running a few wires so we can now plaster and paint the office and have it looking more like a going concern. All I need now are the benches and shelving and stuff out of boxes and completing the seemingly endless list of other things to do.
.

The photo shows the current state of play - a small factory in Oakleigh half full of (hopefully) most of the stuff you need for a motorbike workshop with things being moved around to give access to whatever it is we're trying to do on the day. With Ivan the electrician up a ladder and Finn chasing his Thomas The Tank Engine ball.
.

At this point of time I hope to be up and running around Monday the 19th of January, later than I'd hoped, but I'm not sure how quickly my shit will be getting itself together over the next couple of weeks. And with the exception of the dyno - it will happen at some point in the future, but it's not top priority right now.
.

However, in the short term at least, I'll be taking on fairly simple stuff just because it appears to be a bad time of year to be trying to find unusual parts and get sensible answers out of suppliers, both here and overseas. And I have to get a feel for doing it all myself - it'll definitely be different to the previous 17 years.

.

And I have to fix Minne too - the last time I rode her she failed to proceed several times on a very hot day. She came good with a full tank of fuel so I'm guessing it's vacuum fuel tap or fuel pump. Interestingly it'll be the first time I've experienced issues with either - just like the ignition coil that died many years ago now was the only 2V coil I can recall seeing fail.

.

Moved in!

.

Well, in a fashion. A fashion of all the stuff needed to be a motorcycle workshop unloaded into a little factory in Oakleigh. Plus other stuff that will no doubt be thrown out once I come to the realisation that I really don't need all this crap.

Which leads me neatly into the award for sensational purchase of the week: a pallet truck. One of those things on the right. As I have nearly everything on pallets I can move it all around with this nifty little jigger. Which will be a real bonus as I try to remodel a factory that's about 2/3rds full of pallets with stuff on them. I'm enjoying it so much I'm sure I'll be moving stuff around just for the sake of it.

So now it's into getting set up for work. At this point of time I expect we'll be ready to go in the new year, but not before. More info and progress reports to come as the real work starts.

.

Progress - A location at last!

.
Without wanting to speak too early and give myself grief it would appear I have found a factory for the business. Hopefully I'll have the keys tomorrow morning and then begin the process of moving my stuff in and remodelling the factory as required.

Along with a bit of a drive on Friday to pick up a dyno. Woo hoo, a dyno. Of course, I have to build a room to run it in before I can actually use it, but taking possesion is a good start.

.

The Planning of Business

.
Well, so far it's been a case of trying to work out all the costs that will stop me making a decent living from running my own business and working out everything I need to do to make it happen.

When I make the decision of which way to go it will be posted here. As I'll be needing to start making money out of it very quickly.

My thanks to all those who have wished me well - it helps in the battle to convince myself it will work.

.