Brad The Bike Boy: Ducati ST3 front sprocket incorrect position take 2

Tuesday, October 11, 2016

Ducati ST3 front sprocket incorrect position take 2

See this post for more background: Ducati ST3 front sprocket

I had another ST3 in this week with the same issue, so took some more photos.

Spacers: ST3 (999, etc) on left, 1000SS on right. 19.7mm vs 14.2mm (or something like that, forgotten already).

Sprocket fitted with incorrect spacer.

Sprocket fitted with correct spacer.

2 comments:

Unknown said...: Why on earth would it have been changed in the first place? Factory error?; October 14, 2016 at 2:58 AM
Brad The Bike Boy said...: It seems a lot of ST3 left the factory with the 1000SS spacer.; October 16, 2016 at 6:21 PM

Post a Comment

The 851

The 400SS

I bought this 400SS (genuine 93 model Australian delivery! Woo hoo huh.) after seeing it in Ebay for what was possibly an good price. As ever, good was too good to be true. Badly repaired and rusted out fuel tank, badly repainted side panels, lots of km (83,000 of the bastards), etc. You know, the usual. Purchased in October 2012, as of now (Jan 2014) I've nearly finished a major service. The cam timing is done with some of the Madasl adjustable pullies that have been drilled in 4 different settings for easy dyno testing. And I have some 900 headers to try a 40mm dual exhaust set up on it (ala M400). Not a great deal of progress for 15 months, so it's taking on a long term feel. There's an F1 endurance style seat base (more taper at the rear) and front fairing sitting around, which will require frame mods to fit. It's a bit of a mental sticking point as this time. But hey, it's not like I can devalue it much more.

The Mighty KR1S 250

How it looked the rainy night someone came to take it away. Painted all black when I bought it, at some point later I realised i could rub the black off and have much of the original colour scheme underneath. Although the main fairing was originally from a red KR1 I think, and definitely badly repaired more than once, so it stayed black. And the tail panel shown was bought to replace the one I smashed the only time I crashed it and the last time I rode it at a Sandown track day. A sensational little bike, holed pistons and frequently failing stator windings aside. The first bike I rode on a race track and the first bike I had my knee down on. And a great commuter too I found. It's sometimes nice to have a bike that won't wheelie past the city speed limit in first gear.